Showing posts with label designing. Show all posts
Showing posts with label designing. Show all posts

Wednesday, February 15, 2023

Brown Yoke Sweater Part 3 - looking at an example garment and number crunching

I've mentioned earlier that I want this sweater to be oversized - a 'sweatshirt' type sweater.  So I measured a sweatshirt!   I actually measured two of them.   One pullover style for the body measurement, and a zipper style that I like the sleeve shape and length on.  

Once I had my finished garment inches, I multiplied by the washed and blocked swatch finished stitches per inch and that's my "key" number. 

Years ago the late, great Elizabeth Zimmermann (in her book "Knitting without Tears") introduced  the "EZ percentage system" that demonstrated the above calculation and how to apply it to a sweater with the body being 100% and the upper arm, cuffs, lower ribbing ect being various percentages.   This same system has been used by various authors to describe various sweater templates.  All using your own yarn, on your own needles at your natural tension - not trying to 'make gauge' or use a 'industry standard' pattern.   This flexibility is wonderful if you aren't a 'standard' size.   While designers are providing more size inclusive patterns these days, not all are.   And not all 'large' sizes go up to my actual dimensions.  Plus what if you are using a handspun yarn, or a vintage yarn you recycled from a thrift store sweater, or a mill end?   None of those have manufacture's pattern support!   

So take a chance and make your swatch and design a unique sweater!

There's math, to be sure, but you end up with a total custom sized and shaped sweater.   Template below is from my very battered copy of "Knitting in the Old Way" which applies the percentage system idea to many traditional sweater types.

Recommended resources:

original 1980s copy - new edition in 2005 with a different cover

Raglans, and step by step details.  Highly recommend.
And by the grand dame herself:
Hardcover Knitting Without Tears: Basic Techniques and Easy-To-Follow Directions for Garments to Fit All Sizes Book
Again the older cover.


Monday, February 13, 2023

Brown Yoke Sweater Part 2 - the actual swatch

I finished the swatch prior to the Super Bowl kickoff (I know better than to knit anything critical during a sporting event - your knitting tension can vary with your emotional tension!), and washed and blocked it as I discussed in my last post on the design process for this sweater.

Then I placed two pins exactly 2" / 5 cm apart and carefully counted the number of stitches horizontally.  Be sure to count along a single row.

Then do the same vertically.  Here I didn't get my pins in along the same column of stitches, but did get the ruler placed correctly.  

I ended up with 10 stitches and 13 rows over 2 inches = 5 stitches per inch and 6.5 rows per inch.  Stitches per inch is the more critical number because that will inform your cast on number and therefore the diameter.   Length is a more flexable and fixable.  If a sleeve is too long, for example, you can drop the cuff off, rip back to shorten and reknit the cuff.  But if the entire thing is too tight, only a complete frogging and reknitting can really fix the issue.  

As far as the changes with blocking - the change in size / stitch count was minimal, but the fabric softened up and the yarn 'bloomed' quite a bit.   I do like the feel of the finished fabric.  

Next time - running the numbers and a cast on (or two).

Sunday, February 12, 2023

Brown Yoke Sweater Part 1 - thoughts on swatches and introducing the yarn

There were a couple of comments on previous posts about the fact that I am designing the sweater that I am starting today.  I thought it might be interesting to document the process. 

Sweaters that fit start out with a good gauge swatch.  A lot of knitters complain, "but gauge swatches LIE.  My sweater turned out the wrong size."

Two reasons that can happen.  First, your swatch is too small.  When I was younger, I would get so impatient to start a new project that I resented 'wasting' time on the swatch and did very skimpy ones if I did one at all.  But it is far more of a time waster to get to the end, try on the sweater and realize then that it doesn't fit and will need to be frogged and re-knit.  You really need a large enough swatch to not only accurately measure rows and stitches, but also big enough to see if you like the drape of the piece. My mother's recommendation is "big enough for a patch pocket".   Elizabeth Zimmermann recommended a hat.  BTW, swatch in the same stitch as the main part of the piece.  In the current case, simple stockinette.  If you can, use the same technique as the sweater will be knit in.  However, my flat and circular knitting in stocking stitch does have a very consistent gauge, so I won't worry about that. If this project was all colorwork, I would swatch in the round, but the little bit that will be up in the yoke should be fine and would not be much to reknit if it's drastically off.

Second reason for a swatch failure: you didn't wash and block your swatch.  If you think about it, it makes sense.  You will eventually be washing this piece of clothing.  Ideally, that first bath is right after you finish it, since blocking settles the stitches into the fabric and helps even out inconsistencies in your knitting.  If you've ever looked at a piece of vintage hand made knitwear and marveled over how even and perfect the stitches are, it is not that the original knitter was necessarily a better knitter than you, but years of washing and blocking have evened everything out. You want the finished and washed / blocked garment to fit your measurements.  So wash and block the swatch.   It's instructive to measure both before and after the washing.   Also note if the hand changes - felts a bit, opens up a bit.

For the record. I handwash my knits in warm water with SOAK soap (available at most Local Yarn Stores).  It's specifically formulated for knits and while the bottle says you don't need to rinse, I prefer to think about it as more 'you don't have to be fanatic about rinsing'.  For the love of wool, do NOT use Woolite.   While the original formula was fine, but it's been reformulated into "Woolite Delicate" and the standard Woolite is just an ordinary laundry detergent for machines.  Even though the 'Delicate' version says it safe for handwashing wool, it now contains optical brighteners and is OK for cottons and polyesters. Better to stick with SOAK or Orvus.  Orvus is a livestock shampoo (available at some quilt stores rebranded as 'Quilt Wash' and in larger containers at Tractor Supply, Farm and Ranch, my local feed store and similar).  Since it's a livestock shampoo used to prep animals for the show ring, Orvus is great if you are working with a 'rustic' yarn or a handspun yarn that still had lanolin in the fleece (ie, spun in the grease).  You do have to be careful to rinse several times with the Orvus though; both of these soaps are VERY concentrated - about a quarter teaspoon or four drops in a kitchen sink will do.  

So, I'm going to cast on forty stitches on a US size 7 / 4.5mm needle.  I know what needle to use because I've actually knit with this yarn before.   It's a light worsted.  The ball band and Ravelry both call it 'Aran', but no, it's not. It is a nice fairly even spun 100% wool.  And it had an excellent price point back in 2011 when I purchased it at a local big box store (Michael's).

Off to turn some of this into a 'patch pocket'.  I'll be back with part 2 then.